POCKETWIZARD FLEX TT5 CANON

Item #: 101503

In-store Financing Available
PocketWizard FlexTT5 Transceiver-Canon

The PocketWizard FlexTT5 Transceiver Radio Slave is part of an ultra-versatile radio slave system, and is dedicated specifically to the Canon E-TTL II flash control system. It simply slides directly into the camera's hot shoe, and there are no special settings to make or modes to call up. Use the camera, on-camera flash, or flash commander controls for flash compensation, zone and ratio control. It supports single or multiple dedicated flash units.

The FlexTT5 is the ideal addition to most Canon E-TTL II flash system. Since this system works on digital radio technology, it can support E-TTL operation around corners, out-of-sight, or in bright sunlight.

The FlexTT5 is a "Transceiver", meaning it can be used either as a transmitter when placed into the camera's hot shoe in combination with another FlexTT5 unit on the flash end, or as a receiver with a MiniTT1 transmitter-only unit placed on the camera's hot shoe.

While the FlexTT5 works ideally with many older Canon flashes, the 580EX, 580EX II, and 430EX emit strong RF noise across the PocketWizard's frequency range, and this significantly reduces out-of-box range performance of the FlexTT5 Transceiver.  In PocketWizard's research, the interference from the flash varies wildly from sample to sample; they can only guarantee that the flash will work to ~30' (~10m) in all conditions, although they do have many suggestions for increasing this considerably.

Key Features:


  • 2 Channel Settings + Learn Mode
    Out of the box, the FlexTT5 is programmed for PocketWizard channels 1 and 2. Each setting can also be programmed to transmit and receive any of 20 ControlTL channels for TTL photography and/or 32 standard channels for manual flash photography. The FlexTT5 Transceiver also has a three-zone selector switch which integrates with Canon zones and ratios. The Learn Mode enables programming channels in the field with other PocketWizard radios.

  • HyperSync & High-Speed Sync Technology
    Enables X-sync speeds of up to 1/8000 with full-power flash. High-Speed Sync provides auto flash with the camera's shutter speed setting, up to 1/8000th. Unique programming optimizes HSS for better operation and more shots per set of batteries.

  • Built-In Hot Shoe, Use with Any Flash
    Features a hot shoe on the top, so that you can still mount a flash unit directly onto the camera. This allows you to combine your remote flash with the on-camera flash, or use the on-camera flash for additional E-TTL II control only. Hot shoe contacts automatically detect dedicated ETTL or simple hot shoe flash.

  • Built-in Hot Shoe
    Features a hot shoe on the top, so that you can still mount a flash unit directly onto the camera. This allows you to combine your remote flash with the on-camera flash, or use the on-camera flash for additional E-TTL II control only.

  • Camera/Flash Ports
    The FlexTT5 Transceiver has two plug-in ports for use with remote Canon E-TTL II cameras or other non-TTL flash units. Camera remote triggering requires use of a camera-specific ACC-type cable.

  • Reverse Compatible + Basic Triggering
    Operates on the same channels as all other PocketWizards to work with any unit you may already have. Basic Triggering mode enables standard use with virtually any hot-shoe camera.

  • Remote Camera Triggering/Relay Mode
    This mode can be used to trigger a camera remotely and requires use of a camera-specific ACC-type cable. Auto Relay Mode allows you to trigger a remote camera in sync with a remote flash.

  • Low-Profile Design
    The FlexTT5 lies flat to stay out of the way and uses a flip-up antenna for additional range when needed.

  • Configurable and Upgradeable
    The FlexTT5 features a mini-USB port, which makes it upgradeable and "future-proof" for continuous improvements and compatibility upgrades. The included PocketWizard Utility software allows you to select custom settings through the USB connection and to set it to use specific channels used by other Pocked Wizard units.

    Pocket Wizard USA 1 year limited warranty included.

    Supplied Accessories:
    FlexTT5 Transceiver
    USB cable
    Two (2) AA batteries
    Quick Guide