2 Channel Settings + Learn Mode
The PocketWizard FlexTT5 Transceiver Radio Slave is part of an
ultra-versatile radio slave system, and is dedicated specifically to
the Nikon i-TTL flash control system. It simply slides directly into
the camera's hot shoe, and there are no special settings to make or
modes to call up. Use the camera, on-camera flash, or flash commander
controls for flash compensation, zone and ratio control. It supports
single or multiple dedicated flash units.
The FlexTT5 is the ideal addition to any Nikon i-TTL flash system.
Since this system works on digital radio technology, it can support
i-TTL operation around corners, out-of-sight, or in bright sunlight.
The FlexTT5 is a "Transceiver", meaning it can be used either as a
transmitter placed into the camera's hot shoe, in combination with
another FlexTT5 unit on the flash end, or as a receiver, with a MiniTT1
transmitter-only unit placed on the camera's hot shoe.
Each setting can be programmed to support up to 20 ControlTL channels
for TTL photography, or 32 standard channels for manual flash
photography. The FlexTT5 Transceiver also has a three-zone selector
switch, which integrates with Nikon zones and ratios. The Learn Mode
allows the unit to detect the channel used by any other unit in the
Operates on the same channels as all other PocketWizards and will work
with any unit you may already have.
HyperSync & High-Speed Sync Technology
Supports flash sync speeds of up to 1/500th sec. High-Speed Sync auto
syncs flash system with the camera's shutter speed setting, up to
Built-in Hot Shoe
Features a hot shoe on the top, so that you can still mount a flash
unit directly onto the camera. This allows you to combine your remote
flash with the on-camera flash, or use the on-camera flash for
additional i-TTL control only.
The FlexTT5 Transceiver has two plug-in ports for use with remote Nikon
i-TTL cameras, or other non-TTL flash units. Camera remote triggering
also requires use of a camera-specific "motor cord".
Remote Camera Triggering/Relay Mode
Can be used to trigger a camera remotely. Requires use of a
camera-specific "motor cord". Auto Relay Mode allows you to trigger a
remote camera in sync with a remote flash.
The FlexTT5 lies flat to stay out of the way and uses a flip-up antenna
for additional range when needed.
Configurable and Upgradeable
The FlexTT5 features a mini-USB port, which makes it upgradeable and
"future-proof" for continuous improvements and compatibility upgrades.
The included PocketWizard Utility software allows you to select custom
settings through the USB connection, and to set it to use specific
channels used by other Pocket Wizard units.
Pocket Wizard USA 1 year limited
Two (2) AA batteries